Get a quote
Dark stained oak stair treads and landing with white risers and black balusters

Hardwood stairs in Vaughan

Stair treads, risers and nosings planned with the floors at the top and bottom of the flight.

The flight and both landings

If you are replacing the main-floor wood in a Woodbridge house, include a photo looking up the stairs and another of the landing above.

The stair work has to meet both floors, including a floor that you intend to keep.

MRG finishes hardwood stairs as part of its general contracting work, with treads, risers and nosings included in the agreed job.

Old treads are replaced or sanded, the risers can be painted, and each nosing is cut to fit the step.

Tell us whether the stair is carpeted now and whether you know what material is underneath.

A photo of the whole flight helps explain the job, while close views of worn edges show what needs attention.

Details to include in the request

Number of steps
Count each flight separately and include the landing between flights, so an upstairs stair and a basement stair do not become one unclear total.
Open sides
Show whether a wall closes in both sides or whether one side is exposed, because the edge finish and nosing have to fit that shape.
Turns and landings
Include a photo from above if the stair turns, and mark which landing floors will be replaced in the same job.
Finish
List the parts you want stained or painted, and include a daylight photo of the adjoining floor if its colour needs to be kept.

Sanding or replacing the treads

A worn finish and a damaged tread are different starting points, so the condition of the wood decides which work belongs in the quote.

For sanding, we check the wood that remains and any visible nail heads or gaps before confirming what can be kept.

A stain that has gone deep into the wood can remain visible after sanding.

Replacement treads, risers and nosings are described together in the stair work agreement.

Tell us about any earlier repair and photograph a damaged edge from the side as well as from above.

Do not assume a request to refinish the stairs includes changing the railing or rebuilding the flight.

Describe those changes separately if they are part of the renovation you have in mind.

Sanding and finish coats

Access while the stairs are being finished

In an occupied Kleinburg house, the main stair might be the only route to the bedrooms, so tell us that before dates are discussed.

Include who needs to use each floor and whether a bathroom is available on the level you will be staying on.

Stain and finish coats need drying and curing time, and the finish selected for the work determines when the surface can be used.

We give the dates for the selected finish in writing.

A basement flight needs the same access discussion if laundry, storage or another room will still be in use below.

If other renovation work is planned upstairs, mention the material deliveries and furniture moves that would also use the stair.

Fit the Vaughan work-hour restrictions and access inside the house into the schedule.

Work hours and renovation rules in Vaughan

Questions about hardwood stairs

Should both landings be included with the stair flight?

If you are replacing the main-floor wood in a Woodbridge house, include a photo looking up the stairs and another of the landing above.

The stair work has to meet both floors, including a floor that you intend to keep.

MRG finishes hardwood stairs as part of its general contracting work, with treads, risers and nosings included in the agreed job.

What stair measurements belong in a request?

Count each flight separately and include the landing between flights, so an upstairs stair and a basement stair do not become one unclear total.

Show whether a wall closes in both sides or whether one side is exposed, because the edge finish and nosing have to fit that shape.

Include a photo from above if the stair turns, and mark which landing floors will be replaced in the same job.

When can existing stair treads be kept and sanded?

A worn finish and a damaged tread are different starting points, so the condition of the wood decides which work belongs in the quote.

For sanding, we check the wood that remains and any visible nail heads or gaps before confirming what can be kept.

A stain that has gone deep into the wood can remain visible after sanding.

Send the step count and landings

Include the floors at both ends and tell us whether the stairs are the only route upstairs.

Get a quote
Get a quoteCall